Hello everyone! Danielle here, from thesoftspace. I thought I would share an easy DIY project that I posted on my blog recently. Fun, festive, and cheap – just the way I like doing home decor!
This project takes 5-10 minutes, and only cost me $5.25 – $5 for the frame at a thrift store in Salt Lake City, and $0.25 for the bulletin board at a thrift store here in Albuquerque. Not bad, eh?
YOU WILL NEED:
– An old bulletin board, big enough to fit your frame
– Any picture frame you think is interesting or beautiful (NOTE: make sure it has a front-to-back depth large enough to contain the thickness of the cork board you will be using.)
– A tape measure
– Some kind of cutting device (I ended up using a bread knife.)
1. Measure the inside of your picture frame. Give yourself more room to work with than the tape measure says: for example, if one length of the inside of the frame is 10″, actually use a measurement of 9 3/4″ or something of the like.
2. If there is any kind of border around your bulletin board, snip and pull it off.
3. Using a ruler, trace out the (adjusted) dimensions of your picture frame onto the bulletin board.
4. Cut along the lines you drew. You may have to shave off a bit more from one side or the other if it doesn’t quite fit into your picture frame. Once you get it in the frame, fold down the metal flaps (or staples, etc. – whatever would usually hold the glass, photograph and backing into the frame) to hold the cork board in place.
Et voila! You’re done! Come visit me here for more projects. Have a great week!